VLT Laser logo
VLT LD UV2500 Disinfector — automated non-contact UV laser sanitizerEnlarge

VLT LD UV2500 Disinfector — automated non-contact UV laser sanitizer

Automated UV laser sanitizer for room disinfection, with a web-based control interface.

Key features:

  • 2,500 mW laser output at 405 nm; use under documented operating and protection conditions.
  • Stated treatment cycle: 50 m² in 15 minutes under specified conditions.
  • Web-based interface with output and intensity adjustment.
  • Programmable automated system with a start/stop timer.
  • Designed for treatment applications involving air, surfaces and liquids.
  • No ozone generation from the specified laser source and no toxic aerosol spraying; protective operating procedures remain necessary.
  • Russian certification, two-year warranty and service center support.
  • Operating temperature range from −30°C to +40°C.
Price:
150 000 RUB

Description

VLT LD UV2500 Disinfector is an automated laser treatment system. Its web interface adjusts output, intensity, pulse frequency, exposure time and timed operation. It can be programmed to target local areas and selected difficult-to-access surfaces.

VLT LD UV2500 Disinfector uses a focused pulsed 405 nm laser source. The manufacturer cites research into pulsed 405 nm irradiation of SARS-CoV-2 without added photosensitizers, alongside A. P. Maltsev’s work on mechanisms of laser interaction with cells. Laboratory research does not by itself validate a particular installed treatment process; consult the equipment documentation for tested conditions, performance and protective measures.

Laser treatment research and SARS-CoV-2

The treatment program controls output, pulse frequency and exposure. The manufacturer's example discusses 100 pulses per second and a treatment cycle of up to 15 minutes for 50 m². These are process-specific stated figures, not a guarantee for every room or organism. The system scans a programmed treatment area rather than circulating air through a conventional recirculator, and does not require consumable spray chemicals. Treatment efficacy must be validated for the actual installation and operating conditions.

Stated germicidal effectiveness by wavelength, nm

405 nm light and SARS-CoV-2 research

Technical specifications

Manufacturer
VLT Laser — Advanced Laser Technologies
Country of manufacture
Russia
Stated treatment time for 50 m²
15 min ±2
X/Y scan angle
0–60°; adjustable treatment area
Source type
Focused optical laser source, 405 nm
Adjustable laser output
0–2,500 mW
Dust protection for laser sources
Yes
Stated germicidal effectiveness
Up to 99.9% under the manufacturer's specified conditions; adjustable output, area, exposure time and pulse intensity
Automation
Manual and automatic control; automatic start/stop timer
Operating distance
Stated distance up to 30 m, subject to exposure and treatment conditions
Features
Designed for treatment applications involving air and surfaces; liquid treatment requires an appropriate process
Independent temperature stabilization
Operating temperature: −30°C to +40°C
Operating and protective measures
The specified source does not produce ozone or spray chemical aerosols. Continuous-operation modes must follow the equipment's documented exposure and protection requirements.
Weight and dimensions
9 kg; 34 × 17 × 16 cm
Control
Web interface with programmable intensity, exposure and treatment mode.
Documented warranty
Two years; laser equipment certification for Russia and the Customs Union.

Related products

VLT LD UV10000 Disinfector — automated non-contact laser sanitizer

VLT LD UV10000 Disinfector

285 000 RUB
View details
VLT LD UV5000 Disinfector — automated non-contact laser sanitizer

VLT LD UV5000 Disinfector

210 000 RUB
View details